Endless Mods – EMMi Mod

£20.00

Endless Mods led the way with stacked, now they are leading the way with a revival of the 22mm Mechanical Mod!
The EMMi – Endless Mods – Mi is aptly named after our youngest Daughter, the smallest member of our Family.

The Mod is 22m diameter and just 78mm long. The RDA, which comes with a BF pin you you flavour chasing squonkers out there, is just 22mm high and has a standard 510 drip tip fitting, although the rda works perfectly well without any drip tip. The kit comes complete with Mod, RDA and spares set including the BF pin for the RDA.

The mod uses a different mechanism for “switching” The body carries a contact tube, that is vented, and makes for a permanent contact at the bottom of the mod. There’s a delrin sleeve that goes on top of the battery followed by a coned spring that sit between the delrin battery sleeve and the hybrid, knurled top cap. Although the switch is operated in the conventional way the contact is made at the rda end of the mod. This enabled us to greatly reduce the height of the mod and makes for a nice clean contact every time. Assembling the EM Mi Mod (Click on the link to see a demonstration of the mod being taken apart and put back together)
The contact in the switch sleeve is fully removable for cleaning purposes.

The RDA again is a unique 2 post deck. Our aim with this deck was to make it as simple as possible to build on for the inexperienced but give give enough post holes for the more experienced, elaborate builders out there and I think we created the perfect deck for this. Designed to carry a single coil (0.15 ohms and above is recommended to get the best out of the RDA) the semi restrictive air flow, domed internals on the top cap and the small chambers creates exquisite flavour compared to bigger RDAs.

Available in 4 colour options:

Brass
Black Chrome over Brass
Silver Plated over Brass
Neo Chrome over Brass (Rainbow)
Whats in the box.

EMMi Mod Body
Contact Sleeve
Delrin Batter Sleeve
Coned Spring
Knurled Hybrid
EMMi RDA: Deck, Top Cap
Spares Set including BF Pin

Clear
SKU: moendlessemmi Category:

Description

Endless Mods led the way with stacked, now they are leading the way with a revival of the 22mm Mechanical Mod!
The EMMi – Endless Mods – Mi is aptly named after our youngest Daughter, the smallest member of our Family.

Additional information

Weight N/A
Colour

Rainbow, Stainless, Brass

Reviews

There are no reviews yet.

Be the first to review “Endless Mods – EMMi Mod”

Your email address will not be published.